AirCleaner Hardware Control Panels

The physical AirCleaner Hardware Control Panels are connected to the AirCleaner-2 through a DB9 GPI cable. A Short Y Cable (purchased separately) is used to connect a second AirCleaner Hardware Control Panel to the system for a Dual-User configuration. The AirCleaner Hardware Control Panel ships with a 33-foot shielded cable for connection to the GPI connector on the AirCleaner-2 chassis. In a Dual-User configuration both of 33-foot cables (one from each panel) connect to the Short Y Cable that is connected to the GPI connector on the chassis.

Tip: Refer to the Installation and Cabling QuickStart poster that came with your AirCleaner-2 for detailed cabling and pinout information.

Audio and Video concealment is triggered using the AUDIO and VIDEO buttons. The AUDIO button triggers the concealment of the audio and the VIDEO button triggers the concealment of the video. These concealment buttons operate independently and can be pressed separately or at the same time. When a button is pressed the audio or video concealment is triggered and continues for as long as the button is held.

Tip: The Concealment Button Mode allows you to configure the buttons to operate only when held or as a toggle. Refer to AirCleaner Virtual Control Panel Conceal Button Mode for more information.