Tally Ports

There are tally ports on the control panel and the frame. The tally ports 1 and 2 on the control panel and the frame have the same pinouts. On the frame, the tally ports are identified by the slot and the port number.

The tally ports use a female DB25 connector.



Table 1. Tally Rating
Specification Value
Type Solid-State Contact Closure
Input Voltage 100VDC
Maximum Current 120mA
Note: Tally ports 3 through 6 on the control panel are used for the extended tallies option and require the extended tallies hardware to be installed before they can be used.
Table 2. Panel Tally Locations
Pin Port 1 Port 2 Port 3 Port 4 Port 5 Port 6
1 1 19 37 55 73 91
2 3 21 39 57 75 93
3 5 23 41 59 77 95
4 7 25 43 61 79 97
5 9 27 45 63 81 99
6 11 29 47 65 83 101
7 13 31 49 67 85 103
8 15 33 51 69 87 105
9 17 35 53 71 89 107
10 Common
11 Common
12 Common
13 Common
14 2 20 38 56 74 92
15 4 22 40 58 76 94
16 6 24 42 60 78 96
17 8 26 44 62 80 98
18 10 28 46 64 82 100
19 12 30 48 66 84 102
20 14 32 50 68 86 104
21 16 34 52 70 88 106
22 18 36 54 72 90 108
23 Common
24 Common
25 Common