Aux Power Ports

The aux power ports on the back of the control panel provide power for the touchscreen display and an auxiliary control panel.

Only use the cables provided to connect your Acuity Auxiliary Control Panel or Touchscreen display to the Auxiliary Power module.

Figure: Aux Power Port (female)

Tip: The status LEDs just below the port indicate whether each port is ok (green), or if there is a fault (red). Specific faults are reported on the Status menu.
Table 1. Aux Power Rating
Specification Value
Output Voltage 12VDC
Maximum Current 4A
Pin Signal
2 n/c
3 n/c
4 +12VDC