Home
Ultrix Carbonite Setup
The Ultrix™ router must be set up to support the Ultrix Carbonite on the Software Defined Production Engine (SWR-SDPE) blade. This includes setup of the Ultripower units, DashBoard connections, the matrix database, and the UltriScape Multi-Viewer.
Routed Tallies
The switcher must pass tally information to the router so that the router can tally the correct video source that is being passed to the switcher.

Ultrix Carbonite Setup
The Ultrix™ router must be set up to support the Ultrix Carbonite on the Software Defined Production Engine (SWR-SDPE) blade. This includes setup of the Ultripower units, DashBoard connections, the matrix database, and the UltriScape Multi-Viewer.
- Ultrix Carbonite Hardware Setup
  The router and switcher components of Ultrix Carbonite must be set up separately before they can work together.
- DashBoard Connection
  Ultrix™ has a separate ethernet connection to DashBoard and appears as a separate node in the DashBoard tree view.
- Video Routing in Ultrix
  Sources and destinations in the router must be connected to the inputs and outputs of the switcher.
- Audio Routing in Ultrix™
  Audio is handled independently in the router and is separate from the switcher. You can output Media-Store and Clip Player audio.
- Routed Tallies
  The switcher must pass tally information to the router so that the router can tally the correct video source that is being passed to the switcher.
  - To Set Up TSL Tally on the Switcher
    TSL tallies are used to pass tally information between the router and the switcher.
  - To Set Up TSL Tallies on the Router
- UltriScape Multi-Viewer
  Some of the outputs from each ME are available as PiPs for the software defined UltriScape MultiViewer in the router.

Routed Tallies

The switcher must pass tally information to the router so that the router can tally the correct video source that is being passed to the switcher.

Ultrix™ uses the Routed Tally Mode to properly tally router sources used by the switcher. In Ultrix Carbonite a video source is ingested by the router as a source and routed to a destination that is associated with a switcher input. When the switcher tallies an input, the tally information is sent to the router to tally the source that is feeding the destination that is connected to that switcher input.