Home
Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Frame Diagnostics
Frame Diagnostic Tests
To Perform a Tally Test
The tally test allows you to test the standard parallel tally system of the frame. A Tally Test Box is required to ensure that the tally relays are operating properly.

Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Status
- Options
- Calibration
- Control Panel Diagnostics
- Frame Diagnostics
  - Installed Frame Boards
  - Frame Diagnostic Tests
    - To Perform a GPI Test
      The GPI test allows you to test the functionality of each GPI input and output on the switcher. A graphical representation of each GPI indicates whether a particular GPI is on or off.
    - To Perform a Tally Test
      The tally test allows you to test the standard parallel tally system of the frame. A Tally Test Box is required to ensure that the tally relays are operating properly.
- Port Monitoring and Logs

To Perform a Tally Test

The tally test allows you to test the standard parallel tally system of the frame. A Tally Test Box is required to ensure that the tally relays are operating properly.

Press HOME > More > Diagnostics > Frame Diagnostics > Tally Test.
Use the ME knob to select the SDPE blade that you want to perform the test on.
Press All On to turn all the tallies on, All Off to turn all tallies off, and Prev and Next to run through the tallies one-by-one.

The current tally is listed on the menu.