To Set up a Video Output

Assign video sources or buses to the output HD-BNCs on the back of the switcher. Some outputs are fixed to a specific video signal.

  1. Click Navigation Menu > Configuration > Outputs.


    Note: The number of outputs that can be configured depends on the video mode the switcher is operating in and the number of ABUs connected to the switcher.
    Tip: If you do not have all 4 CUF3-ADD-​I/OPLUS options installed, you must assign an I/O Processor to an input before you can you can use the Configure, Dyn. Range, or Color Gamut settings.
    Tip: Refer to Output FSFC for information on conversion, and To Configure Audio Outputs for information on embedding audio into video outputs.
  2. Click on the Source button for the output BNC that you want to assign a source to.


  3. Click the video source that you want to assign to the output.
    • Physical — the physical inputs to the switcher on the input BNCs.
    • Internal — the internally generated sources of the switcher (ME, MiniME™, chroma key outputs, etc.).
      • BK — black
      • BG — matte generator
      • MinMEX — main program output of MiniME™ X
      • MMX PV — main preview output of MiniME™ X
      • MMXCmb — combined alpha of MiniME™ X
      • PGM — main program output of the switcher
      • PRV — main preview output of the switcher
      • CLN — clean feed for main program of switcher
      • MEX — main program output of ME X (if installed)
      • MEX PV — main preview output of ME X (if installed)
      • MEX CL — clean feed output of ME X (if installed)
      • CKX — chroma key X video
      • CKXA — chroma key X alpha
      • MV VP X — output of Video Processor MultiViewer X.
    • Media — the Media​-Store and MediaWipe sources.
      • MX — Media​-Store video channel X
      • MXA — Media​-Store alpha channel X
      • MEXMW — Media​-Store video channel used for MediaWipe effects on ME X (if installed)
      • MEXMA — Media​-Store alpha channel used for MediaWipe effects on ME X (if installed)
    • Aux Follows — the aux buses.
    • ME Follows — the background, preset, and key buses of each ME.
      • MEXBg — source on background of ME X (if installed)
      • MEXPst — source on preset output of ME X (if installed)
      • MEXKYV — key Y video of ME X (if installed)
      • MEXKYA — key Y alpha of ME X (if installed)
    • MiniME Follows — the background, preset, and key buses of each MiniME™.
      • MMXBg — source on background of MiniME™ X
      • MMXPst — source on preset output of MiniME™ X
      • MMXKYV — key Y video of MiniME™ X
      • MMXKYA — key Y alpha of MiniME™ X
    • Canvas Follows — the background, preset, and key buses of each Canvas.
      • CanXBg — source on background of Canvas X
      • CanXPst — source on preset output of Canvas X
      • CanXKYV — key Y video of Canvas X
      • CanXKYA — key Y alpha of Canvas X
    Note: The MiniME™ preset only shows the source that is selected on the preset bus for the MiniME™. This does not include keys or any video manipulation that is done if the MiniME™ is used as part of a Canvas.
  4. In the Text column, enter a new name for each output you want to identify differently. The name is used to identify the output on the panel mnemonics as well as on menus.