Home
Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
Server Configuration
Quad Viewer Setup
The Quad Viewer output can display either the Quad Viewer or a Count Down display. For Quad Viewer display you can adjust the transparency of the overlay text on the Quad Viewer output.
Count Down Display
The Quad Viewer shows the program output for the Live EE, Playback, or Playlist AIR, depending how the server is configured.

Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
- Server Configuration
  - Channel Setup
  - Video Formats
    When working in 3G video formats, or outputting for UHDTV1, the available formats and number of channels depends on the hardware you have installed in your server.
  - Video Router Setup
    You can connect the server to an external router and control the sources feeding the server.
  - Audio Setup
    You can select the number of audio channels to record, which sources audio will use, and which audio channel to monitor from the analog audio out headphone jack. The number of AES digital audio inputs and outputs depends on the model of server you purchased.
  - Audio Router Setup
    There are two integrated audio routers built into the server. An input router that sends audio from an audio input to any channel transport, and an output router that sends the audio from a channel transport to any audio output. The number of audio inputs and outputs depends on the options you have installed in your server.
  - Timecode Setup
    The selected timecode information that is recorded with the video can be overlaid on the output video stream of the server. This can be time of day linear timecode (LTC) coming into the server, or the embedded ancillary timecode (ATC) in the video stream being recorded.
  - Channel Label Setup
    You can assign a custom name to each channel transport to help identify the server it is on or what it is used for.
  - Quad Viewer Setup
    The Quad Viewer output can display either the Quad Viewer or a Count Down display. For Quad Viewer display you can adjust the transparency of the overlay text on the Quad Viewer output.
    - Quad Viewer Display
      The Quad Viewer outputs show the audio and video output of each group of channel transports in the server. Channels A-D are shown on output Quad ABCD, channels E-H are shown on output Quad EFGH, and channels I-L are shown on output Quad IJKL. The appearance of the Quad Viewer depends on the number of channels installed and how they are configured. The Quad Viewer outputs show the audio and video output of each group of channel transports in the server. Channels A-D are shown on output Quad ABCD and channels E-H are shown on output Quad EFGH. The appearance of the Quad Viewer depends on the number of channels installed and how they are configured.
    - Count Down Display
      The Quad Viewer shows the program output for the Live EE, Playback, or Playlist AIR, depending how the server is configured.
    - To Configure the Quad Viewer
      Select what is displayed on the Quad Viewer output and adjust the transparency of the text overlay on the Quad Viewer output.
  - TSL Tally Setup
    The server can receive TSL messages from a downstream device to tally the channels on the server.
- Remote Control Support
  Use the information in this section to assist you in setting up an external device to control your server.
- Maintenance
  Refer to the following information for performing maintenance on your server, muting an alarm, restoring factory defaults, or upgrading the software.
- AsRun Log Creator
  The server keeps a log of stills and clips that have been played in their entirety on all channel of the server. This information can then be filtered and output into either a CSV file or a PDF report.
- Troubleshooting

Count Down Display

The Quad Viewer shows the program output for the Live EE, Playback, or Playlist AIR, depending how the server is configured.

Channel label and audio meters are shown at the top of the each box.
Current timecode is shown at the bottom of each box.