Home
Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
Server Configuration
Audio Setup
You can select how audio is muted and which audio channel to monitor from the analog audio out headphone jack.
To Configure the Audio Setup
Select the number of channels to record and which channels are sent to the headphones jacks.

Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
- Server Configuration
  - Video Formats
    Select the video format that the server is operating in, and the source of the reference signal.
  - Audio Setup
    You can select how audio is muted and which audio channel to monitor from the analog audio out headphone jack.
    - To Configure the Audio Setup
      Select the number of channels to record and which channels are sent to the headphones jacks.
  - Audio Router Setup
    There are two integrated audio routers built into the server. An input router that sends audio from an audio input to any channel transport, and an output router that sends the audio from a channel transport to any audio output. The number of audio inputs and outputs depends on the options you have installed in your server.
  - Timecode Setup
    The selected timecode information that is recorded with the video can be overlaid on the output video stream of the server. This can be time of day linear timecode (LTC) coming into the server, or the embedded ancillary timecode (ATC) in the video stream being recorded.
  - Channel Label Setup
    You can assign a custom name to each channel transport to help identify the server it is on or what it is used for.
  - TSL Tally Setup
    The server can receive TSL messages from a downstream device to tally the channels on the server.
  - Network Attached Storage (NAS) Setup
- Remote Control Support
  Use the information in this section to assist you in setting up an external device to control your server.
- Maintenance
  Refer to the following information for performing maintenance on your server, muting an alarm, restoring factory defaults, or upgrading the software.
- AsRun Log Creator
  The server keeps a log of stills and clips that have been played in their entirety on all channel of the server. This information can then be filtered and output into either a CSV file or a PDF report.
- Troubleshooting

To Configure the Audio Setup

Select the number of channels to record and which channels are sent to the headphones jacks.

Launch the Tria Config application.

You may be prompted to allow the program to make changes on the computer, click Yes.
Click the Audio tab.
In the Audio Muting Policy area, select how the audio output (AES, embedded, and analog audio out) is muted during playback.
- Mute everything except 100% play speed and JOG STEP — audio is muted at all play speeds except 1× (100%) and during single-frame jogging.
- Mute everything except 100% play speed. Mute JOG STEP — audio is muted at all play speeds except 1× (100%).
- Mute when speed is not in the range 85% through 115% of play speed — audio is muted at all play speeds except in the range of 85% to 115% play speed.
- Mute when playback speed exceeds 200% play speed. — audio is muted only when play speed exceeds 2× (200%).
In the Analog Audio Monitor area, select the channel transport audio that you want to monitor on the analog audio output headphone jack. Only audio channels 1 and 2 are available on the analog audio output port.
Click Apply.