Home
Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
Server Configuration
Quad Viewer Setup
The Quad Viewer HD-BNC output displays the Quad Viewer.

Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
- Server Configuration
  - Channel Setup
  - Video Formats
    Select the video format that the server is operating in, and the source of the reference signal.
  - Video Router Setup
    You can connect the server to an external router and control the sources feeding the server.
  - Audio Setup
    You can select the number of audio channels to record, which sources audio will use, and which audio channel to monitor from the analog audio out headphone jack. The number of AES digital audio inputs and outputs depends on the model of server you purchased. You can select the number of audio tracks to record, which sources audio will use, and which audio channel to monitor from the analog audio out headphone jack.
  - Audio Router Setup
    There are two integrated audio routers built into the server. An input router that sends audio from an audio input to any Media Player, and an output router that sends the audio from a Media Player to any audio output. The number of audio inputs and outputs depends on the options you have installed in your server.
  - Timecode Setup
    The selected timecode information that is recorded with the video can be overlaid on the output video stream of the server. This can be time of day linear timecode (LTC) coming into the server, or the embedded ancillary timecode (ATC) in the video stream being recorded.
  - Channel Label Setup
    You can assign a custom name to each output of a Media Player.
  - Quad Viewer Setup
    The Quad Viewer HD-BNC output displays the Quad Viewer.
    - Quad Viewer Display
      The Quad Viewer HD-BNC outputs show the audio and video output of each Media Player in the server.
    - To Configure the Quad Viewer
      Select what is displayed on the Quad Viewer output and adjust the transparency of the text overlay on the Quad Viewer output.
  - TSL Tally Setup
    The server can receive TSL messages from a downstream device to tally the channels on the server.
- Remote Control Support
  Use the information in this section to assist you in setting up an external device to control your server.
- Maintenance
  Refer to the following information for performing maintenance on your server, muting an alarm, restoring factory defaults, or upgrading the software.
- AsRun Log Creator
  The server keeps a log of stills and clips that have been played in their entirety on all channel of the server. This information can then be filtered and output into either a CSV file or a PDF report.
- Troubleshooting

Quad Viewer Setup

The Quad Viewer HD-BNC output displays the Quad Viewer.

Note: When Kiva is operating in 1080p, the Quad Viewer output is 1080i.