Home
Setup
Video input and output setup, networking, and signalling setup.
Video Inputs
External video sources come into the switcher through XPression or directly through an NDI® stream, and internal sources are generated internally from the switcher.
Substitution Table

Setup
Video input and output setup, networking, and signalling setup.
- Network Setup
  The switcher runs as a service on the PC.
- System Access
  Enable or disable system access and control methods such as FTP.
- System Latency
  The latency of the switcher can be used to adjust system performance.
- Video Inputs
  External video sources come into the switcher through XPression or directly through an NDI® stream, and internal sources are generated internally from the switcher.
  - Video Input Setup
    Video inputs are separated into sources and internal. The sources are the video inputs coming from XPression or NDI® streams, and internal sources are generated internally from re-entries or follows, or from media generators.
  - Source Names
    Each video source in the switcher can be given a unique name. These names can be customized for how they appear on the mnemonics by adjusting the size or the font and the background color.
  - Mnemonics
    The mnemonic displays on the control panel show the name of the video source and can be customized for font size, color, and in some cases icons can be added. The customization that is available depends on the control panel you are using.
  - Auto Key Setup
    An auto key allows you to associate a key alpha with a key video source in the switcher. When the video source is selected as a keyer, the key alpha is automatically used.
  - Input Router
    The input router allows you to assign video sources from XPression or NDI® to switcher inputs.
  - NDI® Audio Sync
    Each NDI® source is synchronised to best preserve proper audio and video timing. This synchronization can be used to correct for audio drift or glitches.
  - Custom Page Auto Follow
    DashBoard pages can be assigned to custom page buttons in Live Assist.
  - Substitution Table
    - To Set Up a Substitution Table
      The substitution table is a single table that allows you to specify a different source that should be taken when a specific source is selected on a bus.
- Video Outputs
  Any source in the switcher can be routed to one of the outputs. Each output is assigned to an XPression framebuffer.
- MultiViewer
  The MultiViewer allows you to view multiple video sources from a single output. Video inputs or outputs on the switcher, including Program and Preview, can be assigned to any box on the MultiViewer.
- Personality
  Personality settings allow you to configure how you interact with the control panel and switcher, as well as how the buttons on the control panel appear. All of these settings are stored in the Personality register.
- ViewControl
  The ViewControl interface through DashBoard allows you to coordinate the control over the Carbonite switcher and other devices through custom controls and transitions.
- MultiPanel
  Each frame supports up to 3 independent control connections (Main, Satellite 1, Satellite 2). Each connection can be from a control panel, DashBoard, or a combination of the two. Add devices on the same control connection mirror each other.
- MIDI Controller
  The MIDI controller is used to control the RAVE audio mixer. The controller connects to the switcher through DashBoard.

Substitution Table

The substitution table can be used with the ME follows feature to create multilingual production feeds. For example, you can have ME 2 follow ME 1 to simultaneous produce multiple feeds. When a source is selected on ME 1, the same source is selected on ME 2. With the substitution table you can have it that when camera 1 is selected on ME 1 the follow will select camera 1 on ME 2 but the substitution table substitutes camera 4 for camera 1 on ME 2. Refer to ME Follows for information on setting up ME follows.

Keep the following in mind:

Keep the following in mind when working with substitution tables:

If you want to create a substitution for an auto-select key, you must set up a substitution for both the fill and the alpha.
Selecting a crosspoint directly on a bus that has a substitution set up for it overrides the substitution. The substitution continues when a new source is selected on the leading bus.