Home
Setup
Video input and output setup, networking, and signalling setup.
Video Outputs
Any source in the switcher can be routed to one of the outputs. Each output is assigned to an XPression framebuffer.

Setup
Video input and output setup, networking, and signalling setup.
- Network Setup
  The switcher runs as a service on the Graphite CPC computer.
- Video Inputs
  External video sources come into the switcher through XPression or directly through an NDI® stream, and internal sources are generated internally from the switcher.
- Video Outputs
  Any source in the switcher can be routed to one of the outputs. Each output is assigned to an XPression framebuffer.
  - Video Output Setup
    You can assign a video source or bus to an output and each output is assigned to an XPression framebuffer.
  - On-Air Setting
    Some switcher outputs can be set to be considered on-air or not. This allows you to set which outputs are tallied, how resource allocation is divided, and how the Roll Clip feature works.
- MultiViewer
  The MultiViewer allows you to view multiple video sources from a single output. Video inputs or outputs on the switcher, including Program and Preview, can be assigned to any box on the MultiViewer.
- Personality
  Personality settings allow you to configure how you interact with the control panel and switcher, as well as how the buttons on the control panel appear. All of these settings are stored in the Personality register.
- ViewControl
  The ViewControl interface through DashBoard allows you to coordinate the control over the Carbonite switcher and other devices through custom controls and transitions.
- MultiPanel
  Each frame supports up to 3 independent control connections (Main, Satellite 1, Satellite 2). Each connection can be from a control panel, DashBoard, or a combination of the two. Add devices on the same control connection mirror each other.
- MIDI Controller
  The MIDI controller is used to control the RAVE audio mixer. The controller connects to the switcher through DashBoard.

Video Outputs

Any source in the switcher can be routed to one of the outputs. Each output is assigned to an XPression framebuffer.