Home
Setup
Reference and video I/O setup, networking, and signalling setup.
MIDI Controller
The MIDI controller is used to control the RAVE audio mixer. The controller connects to the switcher through DashBoard.

Setup
Reference and video I/O setup, networking, and signalling setup.
- Network Setup
  The switcher runs as a service on the PC.
- System Access
  Enable or disable system access and control methods such as FTP.
- Video Mode and Latency
  The switcher can operate in any of the supported video formats (modes). Latency can be used to adjust system performance.
- Video Inputs
  External video sources come into the switcher directly through an NDI® stream, and internal sources are generated internally from the switcher.
- Video Outputs
  Any source in the switcher can be routed to one of the outputs and each output can be assigned to an NDI® stream.
- MultiViewer
  The MultiViewer allows you to view multiple video sources from a single output. Video inputs or outputs on the switcher, including Program and Preview, can be assigned to any box on the MultiViewer.
- Personality
  Personality settings allow you to configure how you interact with the control panel and switcher, as well as how the buttons on the control panel appear. All of these settings are stored in the Personality register.
- ViewControl
  The ViewControl interface through DashBoard allows you to coordinate the control over the Carbonite switcher and other devices through custom controls and transitions.
- MultiPanel
  Each frame supports up to 3 independent control connections (Main, Satellite 1, Satellite 2). Each connection can be from a control panel, DashBoard, or a combination of the two. Add devices on the same control connection mirror each other.
- MIDI Controller
  The MIDI controller is used to control the RAVE audio mixer. The controller connects to the switcher through DashBoard.
  - To Connect the X-TOUCH COMPACT to DashBoard
    DashBoard allows you to configure the MIDI controller connected to RAVE audio mixer.
  - To Configure the X-TOUCH COMPACT Interface
    A custom DashBoard panel is used to automatically do all the mapping for the X-TOUCH COMPACT.
  - To Configure the Button Layers on the X-TOUCH COMPACT
    The Layer A and Layer B files assign the controls on the X-TOUCH COMPACT to MIDI Commands
  - To Map Buttons to Functions
    The map file associates RAVE audio mixer functions to buttons on the X-TOUCH COMPACT.
  - Default X-TOUCH COMPACT Mapping
  - Custom Mapping

MIDI Controller

The MIDI controller is used to control the RAVE audio mixer. The controller connects to the switcher through DashBoard.

For these procedures you will need the following files. They are available with these instructions in your download.

X-TOUCH-map###.controller
Mapping Wizard.grid
X-TOUCH-LayerA###.bin
X-TOUCH-LayerB###.bin

Important: The revision numbers (####) of the .controller and .bin files must match.

MIDI and MMA are trademarks of the MIDI Manufacturers Association.

Compatibility

The MIDI controller and bin files are only compatible with specific versions of switcher software.


X-TOUCH Files	Switcher Software
Version 1: X-TOUCH-map001.controller X-TOUCH-LayerA001.bin X-TOUCH-LayerB001.bin	Graphite 1.2
Version 2: X-TOUCH-map002.controller X-TOUCH-LayerA002.bin X-TOUCH-LayerB002.bin	Graphite 2.0
Version 3: X-TOUCH-map003.controller X-TOUCH-LayerA003.bin X-TOUCH-LayerB003.bin	Graphite 2.2
Version 4: X-TOUCH-map004.controller X-TOUCH-LayerA004.bin X-TOUCH-LayerB004.bin	Graphite 2.3
Version 5: X-TOUCH-map005.controller X-TOUCH-LayerA005.bin X-TOUCH-LayerB005.bin	Graphite 2.4 or higher
	Ultra 4.0 or higher
	Graphite CPC 1.0 or higher