| Transition |
Have the next transition reset to a default background dissolve after each transition. This allows you to prevent the selections from the last transition from being
accidentally included with the next transition. This setting is for the frame.
- No Reset — the next transition settings are not changed after a transition.
- Reset — the next transition is reset to a background only transition after a transtiion.
|
| Next Transition |
Have the next transition buttons on the control panel latch when pressed (toggle). This setting is unique to the control panel.
- Off — press and hold all the buttons you want included in the next transition. All buttons must be pressed at the same time.
- Toggle — press a button to toggle it on or off as being included in the next transition.
|
| Remove Keys |
Have a key removed from the next transition after it has been transitioned off-air using key Cut or Trans buttons. This allows you to transition a key off-air in an emergency
and not have it accidentally transitioned back on-air with the next transition. This setting is for the frame.
- Off — key can remain part of the next transition when it is independently transitioned off-air.
- On — key is removed as part of the next transition when it is independently transitioned off-air.
|
| Background Double Press |
Have a double-press of the next transition background button select the background and all on-air keys as part of the next transition. This setting is unique to the control panel.
- Ignore — ignore the double-press of the next transition background button.
- Transition Clear — set the next transition to include the background and only the on-air keys. If an off-key is selected as part of the next
transition it is deselected.
|
| ME Auto Trans Double Press |
Set what action is performed when the auto transition button is pressed again during a transition. This setting is for the frame.
- Halt Forward — the transition is halted and then continues in the same direction when the transition button is pressed again.
- Reverse — the transition immediately reverses directions when the transition button is pressed.
- Halt Reverse — the transition is halted and then reverses directions when the transition button is pressed again.
- Cut — the transition immediately cuts back to the initial state when the transition button is pressed.
- Ignore — the button press is ignored and the transition continues.
|
| Key Auto Trans Double Press |
Set what action is performed when the independent key auto transition button is pressed again during a transition. This setting is for the frame.
- Halt Forward — the transition is halted and then continues in the same direction when the transition button is pressed again.
- Reverse — the transition immediately reverses directions when the transition button is pressed.
- Halt Reverse — the transition is halted and then reverses directions when the transition button is pressed again.
- Cut — the transition immediately cuts back to the initial state when the transition button is pressed.
- Ignore — the button press is ignored and the transition continues.
|
| Roll Clip |
Set whether the roll clip feature is always on, or must be turned on manually. This setting is for the frame.
- User — the roll clip feature must be turned on manually.
- Force — the roll clip feature is always on.
|
