To Set Up an Output Reference Sync

The reference output allows the switcher to provide a reference signal to other upstream or downstream devices. If the switcher is using internal reference, this reference signal can be sent to other devices so that all your equipment is synced to the same reference.

  1. Click Navigation Menu > Configuration > Reference.


  2. Click on the Reference Output X button for the reference output BNC that you want to set up.
  3. Click on the reference format you want to output from the switcher.
    The available output reference formats depend on the video format that the switcher is operating in. You must be in a 50Hz video format for PAL and a 59.94Hz video format for NTSC.
  4. Select the type of delay you want to apply to the reference signal.


    • V — vertical delay in lines
    • H — horizontal delay in pixels
    • F — frame delay in frames (NTSC/PAL only)
  5. Click Update.
  6. Click Yes to assign the output reference synchronizer.
  7. If you select an analog reference format (NTSC/PAL) you must set whether you want to use color framing for the reference output (Sync) or not (No Sync).