DIP Switches
The DIP switches allow you to set default IP address and other diagnostic states.
| DIP | Description |
|---|---|
| 1 | This DIP switch is used to set the IP address of ethernet port on the frame to the default value. It must be in the up (off) position to set another IP address for the frame. |
| 2 | Reset the root password. |
| 3 | Must be used up (off) for normal operation. Used with DIP 4 to force the system to perform an upgrade from the USB the next time it boots up. This is intended to be used as a recovery upgrade if you cannot connect to the system to perform a normal upgrade. DIP 3 must be down (on) and DIP 4 up (off) for a recovery upgrade. |
| 4 | Must be down (on) for normal operation. Used with DIP 3 to boot the system from the microSD™. DIP 3 must be down (on) and DIP 4 up (off) for a recovery upgrade. |