Acuity® Control Panel/Touchsreen Support
The Acuity® control panel has come in a number of different hardware configurations over the years. Each of these configurations have different compatibilities for software and hardware versions or components.
Note: The Control Panel CPU (sled) is located inside the control panel and is identified with a small
label.
Product | Panel Sled | Software | OS | Display (4800AR-242-02) | Display (4820AR-242-02) | Display (4820AR-243-01) | Display (4820AR-241-01) |
---|---|---|---|---|---|---|---|
ARP | 4820AR-330-01 | 6.0a+ | 46+ | -- | 4 | 4 | 5 |
Acuity® | 4820AR-237-01 | 8.0a+ | 49+ | -- | 1 | 1 | 2 |
Acuity® | 4820AR-236-01 | 7.0a+ | 46+ | -- | 1 | 1 | 3 |
Acuity® | 4820AR-235-01 | 5.0a+ | 45+ | -- | 1 | 1 | 3 |
Acuity® | 4820AR-230A-01 | 1.1+ | 41 | -- | 1 | 1 | 2 |
Vision | 4800AR-230A-02 | 18.1 | 38 | -- | 1 | 1 | 2 |
Vision | 4800AR-230A-01 | 12+ | 38 | 1 | 1 | 1 | 2 |
Vision | 4800AR-230 | 1-11 | 36 | 1 | -- | -- | - |
Cables to be used with specific displays:
- 1 10ft DVI-D to DVI-D Single-Link Cable (726-170R)
- 2 10ft HDMI™ to DVI-D Cable (70-00601)
- 3 10ft HDMI™ to HDMI™ Cable (70-00506)
- 4 10ft DisplayPort™ to DVI-D Cable (not provided)
- 5 10ft DisplayPort™ to HDMI™ Cable (not provided)
Note: If you are switching to a combination that requires cable 3, you must change the
BIOS default display to HDMI™ from DVI.