Home
Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Control Panel Diagnostics
Touchscreen Tests
To Perform a Pattern Test on the Touchscreen
The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.

Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Status
- Options
- Calibration
- Control Panel Diagnostics
  - Installed Control Panel Boards
  - Module Tests
  - Control Panel Power Supply Failure
  - Panel Communications Hub Tests
  - Touchscreen Tests
    - To Perform a Pattern Test on the Touchscreen
      The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.
    - To Perform a Draw Test on the Touchscreen
      The Draw Test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.
    - To Perform the Burn Mode Test of the Touchsreen
      The burn mode performs a number of tests on the control panel to ensure that all internal memory and communications ports are operating properly. To ensure that all external communications ports are operating properly, a loopback adapter must be installed on each serial port.
- Frame Diagnostics
- Port Monitoring and Logs
- Switcher Maintenance

To Perform a Pattern Test on the Touchscreen

The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.

Press HOME > More > Diagnostics > Panel Diagnostics > Touch Screen > Test Pattern.

The touchscreen cycles through a number of test patterns of different colors.
Confirm that the touchscreen is showing the pattern correctly, and that the colors and brightness are consistent.

Tip: You can tap the screen to pause and resume the test.

The test will repeat three times and then exit. You can exit the test early by pressing any key on an attached keyboard.