Home
Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Control Panel Diagnostics
Touchscreen Tests
To Perform a Draw Test on the Touchscreen
The Draw Test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.

Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Status
- Options
- Calibration
- Control Panel Diagnostics
  - Installed Control Panel Boards
  - Module Tests
  - Control Panel Power Supply Failure
  - Panel Communications Hub Tests
  - Touchscreen Tests
    - To Perform a Pattern Test on the Touchscreen
      The pattern test allows you to visually check the performance of the touchscreen as it cycles through a number of patterns and colors.
    - To Perform a Draw Test on the Touchscreen
      The Draw Test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.
    - To Perform the Burn Mode Test of the Touchsreen
      The burn mode performs a number of tests on the control panel to ensure that all internal memory and communications ports are operating properly. To ensure that all external communications ports are operating properly, a loopback adapter must be installed on each serial port.
- Frame Diagnostics
- Port Monitoring and Logs
- Switcher Maintenance

To Perform a Draw Test on the Touchscreen

The Draw Test allows you to visually check the functionality of the touchscreen by having it feedback the location of where you touch with an X on the screen.

Press HOME > More > Diagnostics > Panel Diagnostics > Touch Screen > Draw Test.
Tap the screen to start the test.
Trace the yellow line from the X to the O with your finger.
Press Quit.