To Save a Clip to the Clip Register
Capture and store a replay clip to the Clip Register for future use.
- Mark the clip you want to save.
- Use the keyboard to enter the number of the Bank (0-99) that you want to store the clip to in the ENTRY field and press SHIFT > LOAD.
-
Manually adjust the in-point and out-point as required.
- In-Point — press GOTO IN (the IN button turns red and the playout channel goes into PLAYBACK mode) and use the rotary dial to select the new point and press IN to mark it.
- Out-Point — press GOTO OUT (the OUT button turns red and the playout channel goes into PLAYBACK mode) and use the rotary dial to select the new point and press OUT to mark it.
Tip: You can also press
,
,
,
, or
buttons to fine-tune the points.Tip: You can use the softkeys on the Control Surface to select a different camera angle. - Press SAVE to save the clip with all the camera angles to the Clip Register.
-
Press LOAD to load the clip.
The playout channel goes into CLIP PLAY mode and the in-point of the new clip is shown. The IN button lights red to indicate that you are looking at the in-point of the new clip.
