Home
Configure AirCleaner-2 from the Chassis Menu
Configure the AirCleaner-2 using Chassis Menu.
Maintenance
Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
Factory Reset
Return all system setting to the factory default.
To Restore Factory Defaults from the Chassis Menu
Return all configurations to the factory default settings.

Configure AirCleaner-2 from the Chassis Menu
Configure the AirCleaner-2 using Chassis Menu.
- Chassis Menu System
- Video Reference and Operating Format
- Number of Users
- Total PGM Delay
- PGM Out Audio-Video Offset
- User 2 Delay
- Video Reaction Times
- Audio Reaction Times
- End Concealment
- Video Connections
- Supported Video Formats
- Audio Connections
- Video Concealment
  Video concealment applies an effect or substitute source to obscure or replace unwanted video.
- Audio Concealment
  Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
- User Profiles
- Maintenance
  Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
  - Manual Bypass
    The system can be put into bypass mode for maintenance, troubleshooting, or simply to remove the delay from the video/audio path. Enabling Bypass will remove all delays, effectively routing PGM IN video/audio directly to PGM OUT.
  - Model and Software Version
    The model, software, and firmware versions of your AirCleaner-2 can help you when contacting Ross Technical Support.
  - Factory Reset
    Return all system setting to the factory default.
    - To Restore Factory Defaults from the Chassis Menu
      Return all configurations to the factory default settings.

To Restore Factory Defaults from the Chassis Menu

Return all configurations to the factory default settings.

Turn the SELECT knob to User Memory Menu and press the SET knob.
Turn the SELECT knob to select Factory Defaults and press the SET knob.
Press the SELECT knob to recall the factory default settings.