Home
Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
Network Setup
System Time
To Set System Time Manually

Setup
Network connection, video reference, video input and output setup, switcher personality settings, device control and GPIs, aux panels, color correction, and MultiPanel.
- Network Setup
  - Frame Network Setup
    From the frame web interface, you can set up the IP Address of the frame, as well as selecting the IP addresses of all the control panels, and SoftPanel, that can access the frame.
  - Control Panel Network Setup
  - Default Network Settings
  - Network Security
  - System Time
    - To Set System Time Manually
    - To Set System Time Automatically
- Video Reference
- Video Input Setup
- Video Output Setup
- Personality
- GPI Control
- Live Edit Decision Lists
- MultiPanel
- Color Schemes
- Device Control
- Auxiliary Control Panels
- Panel Modules
- Acuity Rack Panel
- Color Correction
- High Dynamic Range (HDR) and Wide Color Gamut (WCG) Conversion
- SmartConversion

To Set System Time Manually

Note: If the switcher is using a Network Time Protocol Server (NTP) to set the system time. You must remove the NTP servers via the Web UI to be able to set the time manually.

Press HOME > Setup > More > Set System Time.
Press Date and use the Year, Month, and Day knobs to set the current date.
Press Time and use the Hour. Minute, and Second knob to set the current time.
Press Set.