Frame DIP Switches
There are a number of DIP switches on the SDPE blade that are used to diagnose the operation of the switcher.
| DIP | Description |
|---|---|
| 1 | This DIP switch is used to set the IP address of ethernet port on the frame to the default value (192.168.0.123). It must be in the up (off) position to set another IP address for the frame. |
| 2 | This DIP switch is unused and should be left in the default up (off) position. |
| 3 | Enables the micro switch (on) that can be used to power cycle the SDPE blade. This functionality is intended to be used with DIP 4 to force a recovery upgrade. A recovery upgrade is only to be used when advised by Ross Video Technical Support. |
| 4 | Force the switcher to perform an upgrade (on) from the USB the next time it boots up. This is intended to be used as a recovery upgrade if you cannot connect to the switcher to perform a normal upgrade. |