Setup
Network, reference, video I/O, and signalling setup.
- Network Connections
- Video Reference
- Video Input Setup
  - Source Names
  - Video Setup
    - To Set The Video Mode
    - To Set Up an Auto Key Association
    - To Assign a Garbage Mask to an Input
      The garbage mask input is similar to a standard box mask but allows for a dynamically generated mask. The mask is applied directly to the chroma key outputs and does not consume any of the key resources of the MiniME™.
    - To Assign an 0:4:4 Stream to a Source
      The UltraChromeHR signal consists of a standard 4:2:2 camera input and an exclusive 0:4:4 chroma input from the Ross ACID cameras. You must associate the 0:4:4 input with the primary camera input.
  - Frame Delays
- Video Output Setup
- Media-Store Audio Output
- Color Correction
- GPI Control

To Set The Video Mode

Click Navigation Menu > Configuration > Inputs > Physical

Each input number corresponds to an input BNC on the back of the frame.
Click the Vidmode button for the input you want to set the video mode for and select a video mode.
- HD/3G — the video input on this BNC is in an HD or 3G video format.
- SD — the video input on this BNC is in an SD video format.