Home
Diagnostics and Maintenance
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Frame DIP Switches
The DIP switches allow you to set default IP address and other diagnostic states.

Diagnostics and Maintenance
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Switcher Status
  The status menus show information for various components of the frame.
- Switcher Logs
  Switcher logs can be used to identify and diagnose problems with the switcher. Use this information when contacting Ross Video Technical Support.
- Diagnostic Tests
  Diagnostics consist of a number of tests that are used to confirm the functionality of your equipment.
- Error Messages
  The switcher will show an error message on the control panel display when a problem is detected.
- Switcher Reset
  If required, the switcher can be reset to return it to a user-defined default setting (RState), or the factory default state. A reset can be performed for the entire switcher, or individual components, such as keys.
- Frame DIP Switches
  The DIP switches allow you to set default IP address and other diagnostic states.

Frame DIP Switches

The DIP switches allow you to set default IP address and other diagnostic states.

There are a number of DIP on the back of the switcher that are used to diagnose the operation of the switcher.

Table 1. Ultra Frame DIP Switches
DIP	Description
1	This DIP switch is used to set the IP address of ethernet port on the frame to the default value (192.168.0.123). It must be in the up (off) position to set another IP address for the frame.
2	Reset the root password.
3	Enables the micro switch (on) that can be used to power cycle the switcher. This functionality is intended to be used with DIP 4 to force a recovery upgrade. A recovery upgrade is only to be used when advised by Ross Video Technical Support.
4	Force the switcher to perform an upgrade (on) from the USB the next time it boots up. This is intended to be used as a recovery upgrade if you cannot connect to the switcher to perform a normal upgrade.