Laser Safety Measures

Optical Fibers Safety

  1. Before using this product and any associated equipment, refer to the sections below so as to avoid personnel injury and to prevent product damage. For further safety information when using fiber products, consult the following publications:

    • IEC 60825-1:2014, Safety of Laser Products - Part 2: Safety of Optical Fiber Communication Systems (OFCS) (for use outside of the U.S.A.)
    • ANSI Z136.2, Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources (for use in the U.S.A.)

    Products may require specific equipment, and /or installation procedures be carried out to satisfy certain regulatory compliance requirements.

    • Notice — CLASS 1 LASER PRODUCT IEC 60825-1:2014
    • Caution — INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM.

  2. During normal operation of this product, observe the following safety measures:

    • Do not stare at, or into, broken, or damaged, fibers.
    • Do not stare at, or into, optical connectors.
    • Only properly trained and authorized personnel shall be permitted to perform laser/fiber optic operations.
    • Ensure that appropriate labels are displayed in plain view and in close proximity to the optical port on the protective housing/access panel of the terminal equipment.
    Notice: Before operating or servicing this product, all personnel should be familiar with laser safety and fiber handling practices.

  3. During maintenance and servicing of this product, only properly trained and authorized personnel shall be allowed to use optical test or diagnostic equipment.

    Warning: Do not use optical equipment, such as a microscope or an eye loupe, to stare at the energized fiber end. Doing so may damage your eyes.