To Configure the Audio Setup

Select the number of channels to record and which channels are sent to the headphones jacks.

  1. Launch the Tria Config application.

    You may be prompted to allow the program to make changes on the computer, click Yes.

  2. Click the Audio tab.


  3. In the Audio Tracks area, select the number of audio channels to record.
    • 2 track audio — record two channels of audio.
    • 4 track audio — record four channels of audio.
    • 8 track audio — record eight channels of audio.
    • 14 track audio — (software option) record fourteen channels of audio.
  4. In the Audio Tracks in an ISO Clip area, select the number of audio channels to record per input channel when recording in ISO mode.
  5. In the Audio Muting Policy area, select how the audio output (AES, embedded, and analog audio out) is muted during playback.
    • Mute everything except 100% play speed and JOG STEP — audio is muted at all play speeds except 1× (100%) and during single-frame jogging.
    • Mute everything except 100% play speed. Mute JOG STEP — audio is muted at all play speeds except 1× (100%).
    • Mute when speed is not in the range 85% through 115% of play speed — audio is muted at all play speeds except in the range of 85% to 115% play speed.
    • Mute when playback speed exceeds 200% play speed. — audio is muted only when play speed exceeds 2× (200%).
  6. Click Apply.