Home
Channel Transport Control
Each channel in the server has a dedicated channel transport in Tria Explorer that is used to load, play, record, and seek within clips. Clips are loaded into the channel transport from the Clip Library.
Clip Repeat Modes

Channel Transport Control
Each channel in the server has a dedicated channel transport in Tria Explorer that is used to load, play, record, and seek within clips. Clips are loaded into the channel transport from the Clip Library.
- To Load a Clip
  The clip can start to play as soon as it is loaded into a channel transport.
- To Trim a Clip
  You can trim the head (beginning) and tail (ending) off of a clip to shorten it and change the frame the clip starts and ends on. Trimming a clip is not destructive and the entire clip can be restored at any time. You can also edit the trim information from the metadata of the clip.
- To Play a Clip
  Clips can play automatically once loaded, loop, or play at faster or slower speeds.
- To Unload a Clip
  Remove a clip from the current channel transport.
- Clip Repeat Modes
- Recording a Clip
- Locking Channel Transport Control
- Keyboard Shortcuts

Clip Repeat Modes

There are a number of ways to have a clip continuously loop when playing out. These modes can be set in the metadata of a clip so that the clip always loads in this mode. They can also be set manually from the channel transport controls, or they can be set remotely from an external device.

Only one play repeat mode can be active at a time.

Tip: Repeat modes use Play Repeat IN and Play Repeat OUT points to determine what video to repeat. The default values for these points are stored in the metadata of the clip.