Setup
Reference and video I/O setup, switcher personality, and signalling setup.
- Network Connections
- Video Reference
- Video Input Setup
- Video Outputs
- Audio Outputs
- Switcher Personality
- GPI Control
- Live Edit Decision Lists
  - LiveEDL Setup
  - Timecode Setup
    - To Confirm External LTC Signal
      If you have an external linear timecode generator connected to the switcher, you can confirm that the switcher is receiving timecode data.
    - To Set Up Communications with a TSC-9902
    - To Set the LTC Timecode Source
  - LiveEDL Data Capture
- MultiPanel

Timecode Setup

The switcher uses timecode data to mark the EDL file so that it can be used in the non-linear editing suite along with the feeds from the video servers. The timecode data can be either from an external timecode generator, or internally generated. An offset can be applied to both timecode sources.

For an external timecode, the Ross® GearLite TSC-9902 must be connected to the serial port of the switcher. Refer to the documentation that came with the TSC-9902 for information on pinouts and setup.