To Set a Static IP Address

You must have the switcher connected to a network to be able to set a static IP. If the switcher is not connected to a network, the switcher does not display the IP address.

Note: Ensure that DIP switch 3 on the frame is set in the up position. If this DIP switch is set in the down position, the IP address is fixed at 192.168.1.1 192.168.0.123 . Ensure that DIP switch 3 on the frame is set in the up position. If this DIP switch is set in the down position, the IP address is fixed at 192.168.1.1 192.168.0.123 .
  1. Press MENU > SYSTEM > NEXT > NEXT > FrmIP Addr.
  2. Use the left knob to select Mode.
  3. Press the Edit knob.
  4. Use the Value knob to select Static.
  5. Press NEXT.
  6. Use the left knob to select Addr and press the Edit knob.
    1. Use the Field knob to select the segment in the address that you want to change.
    2. Use the Value knob to select the new value you want to use for that segment.
  7. Use the left knob to select Mask.
    1. Use the Field knob to select the segment in the mask that you want to change.
    2. Use the Value knob to select the new value you want to use for that segment.
  8. Use the left knob to select Gatwy.
    1. Use the Field knob to select the segment in the gateway that you want to change.
    2. Use the Value knob to select the new value you want to use for that segment.
  9. Press the Gatwy knob.
  10. Press the Reboot knob to restart the switcher in with the new static IP address.