Warning: Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with manufacturer's
instructions.
- Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with
liquids, such as vases, are placed on the apparatus.
- To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug
from the AC receptacle.
- The mains plug of the power supply cord shall remain readily operable.
Warning: Indoor Use: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
- The safe operation of this product requires that a protective earth connection be provided. A
grounding conductor in the equipment's supply cord provides this protective earth. To reduce the
risk of electrical shock to the operator and service personnel, this ground conductor must be
connected to an earthed ground.
Warning: This apparatus, when equipped with multiple power supplies, can generate
high leakage currents. To reduce the risk of electric shock, ensure that each individual supply
cord is connected to its own separate branch circuit with an earth connection.
CAUTION: These service instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.
- Service barriers within this product are intended to protect the operator and service personnel
from hazardous voltages. For continued safety, replace all barriers after servicing.
- Certain parts of this equipment still present a safety hazard with the power switch in the OFF
position. To avoid electrical shock, disconnect all A/C power cords from the chassis' rear
appliance connectors before servicing.
- This product contains safety critical parts, which, if incorrectly replaced, may present a risk
of fire or electrical shock. Components contained within the product's power supplies and power
supply area are not intended to be customer-serviced and should be returned to the factory for
repair.
- To reduce the risk of fire, replacement fuses must be the same type and rating.
- Use only power cords specified for this product and certified for the country of use.
- The safe operation of this equipment requires that the user heed and adhere to all installation
and servicing instruction contained within the equipment's Setup Manuals.
Warning: This product includes an Ethernet Port
which allows this product to
be connected to a local area network (LAN). Only connect to networks that remain inside the
building. Do not connect to networks that go outside the building.
CAUTION: This apparatus contains a Lithium battery, which if replaced incorrectly, or
with an incorrect type, may cause an explosion. Replace only with a CR2032 coin type lithium
battery. Dispose of used batteries according to the manufacturer's instruction by qualified
service personnel.