Home
Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
Replay Setup
User Setup Files
To Load a User Setup File
User Setup files can be loaded either from the hard drive or a USB drive installed into the USB port on the Control Surface.

Setup
Setup of channel allocation, video format, video codecs, timecode, audio and video routing, remote communications and more.
- Server Configuration
- Replay Setup
  - Control Surface Connection
  - Server Setup for Replay
  - User Setup
  - User Setup Files
    - To Save a User Setup File
      User Setup files can be stored either to the hard drive or a USB drive installed into the USB port on the Control Surface.
    - To Load a User Setup File
      User Setup files can be loaded either from the hard drive or a USB drive installed into the USB port on the Control Surface.
  - To Name a Camera Input
    Set the name that appears on the menus for the camera input.
- Remote Control Support
  Use the information in this section to assist you in setting up an external device to control your server.
- Maintenance
  Refer to the following information for performing maintenance on your server, muting an alarm, restoring factory defaults, or upgrading the software.
- AsRun Log Creator
  The server keeps a log of stills and clips that have been played in their entirety on all channel of the server. This information can then be filtered and output into either a CSV file or a PDF report.
- Troubleshooting

To Load a User Setup File

User Setup files can be loaded either from the hard drive or a USB drive installed into the USB port on the Control Surface.

Press MARK + SCROLL > User Setup Files (5).
Select the drive where the file is stored.

Note: If the file is stored on a USB drive, you must install the USB drive into the USB port on the front of the Control Surface.
- Hard Drive — selected by default (press H: Drive (7) from USB selection)
- USB — press Control Surface USB (7).
Select the user setup file that you want to load and press LOAD File (1).

Tip: To rename an existing file on the selected drive select the user setup file you want to rename, enter a new name in the ENTRY field, and press RE-NAME File (3).
Press EXIT (10).