Safety Information

Important Safety Notices

This system complies with safety standard IEC/EN60065. To ensure safe option and to guard against potential shock hazard or risk of fire, the following must be fulfilled:
  • This system features auto-ranging power supplies. Ensure that your power source is within the correct range of voltage and frequency, as required by the system.
  • Each chassis in this system must be electrically grounded by connecting the input power cord(s) to a correctly wired and grounded power outlet.
  • For ventilation, the front and rear of the unit must have minimum clearance of 4 inches, except for cables. No newspapers, tablecloths, curtains, etc. shall block the vents. No naked flames, such as candles shall be placed on the apparatus.
  • This equipment shall not be exposed to splashing or dripping liquids. No objects filled with liquids, such as vases shall be placed on the equipment.
Warning: Completely disconnect all input AC power cords from the chassis before removing the top cover from the chassis. Failure to do so will expose dangerous electric currents and voltages. Physical contact with these electric currents and voltages is extremely dangerous and may result in severe physical injury or death! Only qualified service personnel should remove the top cover from the chassis.
voltage: Modules marked with this symbol may be removed while the system is operating (powered). After removing a module, beware of dangerous electric currents and voltages that are exposed on the module receptacle connector inside the chassis. Please keep fingers, tools, and foreign metal objects away from the exposed receptacle connector while the chassis has input AC power applied. Physical contact with these electric currents and voltages is extremely dangerous and may result in severe physical injury or death! Only qualified service personnel should remove these modules.