Home
Configure AirCleaner-2 from the Chassis Menu
Configure the AirCleaner-2 using Chassis Menu.
Maintenance
Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
Manual Bypass
The system can be put into bypass mode for maintenance, troubleshooting, or simply to remove the delay from the video/audio path. Enabling Bypass will remove all delays, effectively routing PGM IN video/audio directly to PGM OUT.
To Enable/Disable Bypass from the Chassis Front panel
Bypass the delay buffer.

Configure AirCleaner-2 from the Chassis Menu
Configure the AirCleaner-2 using Chassis Menu.
- Chassis Menu System
- Video Reference and Operating Format
- Number of Users
- Total PGM Delay
- PGM Out Audio-Video Offset
- User 2 Delay
- Video Reaction Times
- Audio Reaction Times
- End Concealment
- Video Connections
- Supported Video Formats
- Audio Connections
- Video Concealment
  Video concealment applies an effect or substitute source to obscure or replace unwanted video.
- Audio Concealment
  Audio concealment applies an effect or substitute source to obscure or replace unwanted audio.
- User Profiles
- Maintenance
  Refer to the following information for performing maintenance on your AirCleaner-2 or restoring factory defaults.
  - Manual Bypass
    The system can be put into bypass mode for maintenance, troubleshooting, or simply to remove the delay from the video/audio path. Enabling Bypass will remove all delays, effectively routing PGM IN video/audio directly to PGM OUT.
    - To Enable/Disable Bypass from the Chassis Front panel
      Bypass the delay buffer.
    - To Configure the Manual Bypass Mode from the Chassis Menu
      The manual bypass button can either trip an internal bypass relay, or put the system in EE mode.
  - Model and Software Version
    The model, software, and firmware versions of your AirCleaner-2 can help you when contacting Ross Technical Support.
  - Factory Reset
    Return all system setting to the factory default.

To Enable/Disable Bypass from the Chassis Front panel

Bypass the delay buffer.

Flip up the clear plastic cover over the MANUAL BYPASS button and press the red button.

The MANUAL BYPASS button will light up, indicating that bypass is active.
Repeat this procedure to turn bypass off.
The MANUAL BYPASS button will not be lit, indicating that bypass is not active.