9.2c Features

New Personality Options

The following switcher personality options have been added or changed.

Router Name on MV

Set whether the MultiViewer shows the router mnemonic names or the switcher names for video sources.

Press HOME > Setup > Personality and use the Option knob to select Router Name on MV.

  • Router Name — MultiViewer uses router mnemonic names.
  • Set Name — MultiViewer uses switcher source names.

RossTalk Updates

The following commands have been added or updated.

PGM A/B Support

Support has been added to address PGM A,B,C,D,E,F when specifying an ME for a RossTalk command.

User Variables

The USERVAR RossTalk command has been added that allows you to set a value for a CC user variable or perform an operation on an existing CC variable.

RossTalk Tria Support

Support has been added for RossTalk control of Ross Video Servers. Commands include CUE, PLAY, STOP, GOTO, JOG, LOOP, ANGLE, and EJECT.

Tally Never Option

The option has been added to have sources selected on an ME or aux bus never tallied.

Press HOME > Setup > Installation > Output > More > ME / Aux Tally.

Alternate Device Locked

If an alternate device is assigned to a primary device, but not enabled, a lock symbol is shown on the menu (Press HOME > More > Remote Enables > Alternate Device) to indicate that you cannot toggle to the alternate.

Ultritouch Adds ME Bus

A ME Bus control has been added to the Ultritouch interface to allow you to select sources on an ME and keyer from the Ultritouch.



You can switch between the Aux Panel and Shot Box interface from the popout menu.



Expanded Up-Conversion

Support has been added for up-converting a number of video formats.

  • 480i -> 720p 59.94Hz
  • 480i -> 1080p 59.94Hz
  • 720p 59.94Hz -> 1080i 59.94Hz
  • 1080i 59.94Hz -> 720p 59.94Hz
  • 576i -> 720p 50Hz
  • 576i -> 1080p 50Hz
  • 720p 50Hz -> 1080i 50Hz
  • 1080i 50Hz -> 720p 50Hz

Split Self Keys Persist

When you split a Self key now, you can change the fill source without reverting the alpha. The split functionality will remain as long as the KEY MEM in not active and you don't change key types. Press the SELF key type button again to revert the split.