Home
Software Upgrade
Software upgrades are performed from the web interface to the switcher frame. You must download the upgrade files and have them on a computer connected to the switcher over Ethernet to perform the upgrade.
Performing the Upgrade

Software Upgrade
Software upgrades are performed from the web interface to the switcher frame. You must download the upgrade files and have them on a computer connected to the switcher over Ethernet to perform the upgrade.
- Upgrade File Verification
- Downgrade Compatibility
- Hardware Compatibility
- Backup Switcher Registers
- Prepare the Switcher Before an Upgrade
- Performing the Upgrade
  - To Upgrade the Switcher Software
  - To Add a Panel File
    Add a second panel file to the switcher to support multiple panel hardware revisions.
- Restoring the Switcher After the Upgrade

Performing the Upgrade

Depending on the number of boards, cards and modules in the switcher, and the current version of software on them, it will take between 15 and 40 minutes to complete the upgrade.

Note: After the Factory Default is performed, the Bus Maps and Output BNC settings have been changed to the default settings. Ensure that you can find a source button that is assigned to a valid input, and that you have a monitor connected to a default Aux Bus output of your switcher. You will need to verify that the switcher is passing video properly after the upgrade.