To View the Non-Sync Status

  1. Press HOME > Status > Non-Sync Status > MultiProcessor Input Boards.

    A green or yellow indicator is shown for each input on each MultiProcessor Input. A green indicator shows that the source is synchronized with the switcher reference. A yellow indicator shows that the source is not synchronized with the switcher reference.

  2. Press MEs.

    A green or yellow indicator is shown for each bus on each ME. As you select different sources on each bus, the indicator updates, showing if the source is synchronized or not. A green indicator shows that the source selected on the corresponding bus and ME is synchronized with the switcher reference. A yellow indicator shows that the source selected on the corresponding bus and ME is not synchronized with the switcher reference. This source should be synchronized to the switcher reference from the source.

  3. Press Output Boards.
    Note: If an output is set to UHDTV1, only the first output in the group of four outputs that make up the UHDTV1 output is shown. The remaining outputs are grayed out.

    A green or yellow indicator is shown for each output BNC on each Video Output board installed in the frame. A green indicator shows that the video being output on the corresponding output BNC is synchronized with the switcher reference. A yellow indicator shows that the video being output on the corresponding BNC is not synchronized with the switcher reference.