Home
Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
Frame Diagnostics
Frame Diagnostic Tests
To Perform a Tally Test
The tally test allows you to test the standard parallel tally system of the frame. A Tally Test Box is required to ensure that the tally relays are operating properly.

Diagnostics
Switcher status menus and error conditions, installed options, calibration, diagnostics, and logs.
- Status
- Options
- Calibration
- Control Panel Diagnostics
- Frame Diagnostics
  - Installed Frame Boards
  - Frame Diagnostic Tests
    - To Perform a DIP Switch Test
      The DIP test allows you to verify the current settings of the DIP Switch on the Frame CPU board (4810AR-002). To confirm this test, you must remove the Frame CPU board to verify the setting of the DIP Switch. Contact Ross Video Technical Support before attempting to change any DIP switch setting on the Frame CPU board.
    - To Perform a Frame Tx/Rx Test
      The frame Tx/Rx test allows you to test the various serial communications ports on the frame. This helps to diagnose communications problems with external devices that you may be having on a particular serial communications port on the frame.
    - To Perform a GPI Test
      The GPI test allows you to test the functionality of each GPI input and output on the switcher. A graphical representation of each GPI indicates whether a particular GPI is on or off.
    - To Perform a Tally Test
      The tally test allows you to test the standard parallel tally system of the frame. A Tally Test Box is required to ensure that the tally relays are operating properly.
    - To Perform a Contact Closure Test
      The contact closure test allows you to test the contact closure system of the frame. A graphical representation of each contact closure indicates whether a particular contact closure is on or off.
  - Frame Fan Failure
  - Frame Power Supply Failure
- Port Monitoring and Logs
- Switcher Maintenance

To Perform a Tally Test

The tally test allows you to test the standard parallel tally system of the frame. A Tally Test Box is required to ensure that the tally relays are operating properly.

Press HOME > More > Diagnostics > Frame Diagnostics > Tally Test.
Use the Slot knob to select the board that you want to perform the test on.
Press All On to turn all the tallies on, All Off to turn all tallies off, and Prev and Next to run through the tallies one-by-one.

The current tally is listed on the menu.