Important Safety Instructions

  1. Warning: Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
  8. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Unplug this apparatus during lightning storms or when unused for long periods of time.
  13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  14. Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
  15. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
  16. The mains plug of the power supply cord shall remain readily operable.
  17. Warning: Indoor Use: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
  18. The safe operation of this product requires that a protective earth connection be provided. A grounding conductor in the equipment's supply cord provides this protective earth. To reduce the risk of electrical shock to the operator and service personnel, this ground conductor must be connected to an earthed ground.
  19. Warning: This apparatus, when equipped with multiple power supplies, can generate high leakage currents. To reduce the risk of electric shock, ensure that each individual supply cord is connected to its own separate branch circuit with an earth connection.
  20. CAUTION: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
  21. Service barriers within this product are intended to protect the operator and service personnel from hazardous voltages. For continued safety, replace all barriers after servicing.
  22. Certain parts of this equipment still present a safety hazard with the power switch in the OFF position. To avoid electrical shock, disconnect all A/C power cords from the chassis' rear appliance connectors before servicing.
  23. This product contains safety critical parts, which, if incorrectly replaced, may present a risk of fire or electrical shock. Components contained within the product's power supplies and power supply area are not intended to be customer-serviced and should be returned to the factory for repair.
  24. To reduce the risk of fire, replacement fuses must be the same type and rating.
  25. Use only power cords specified for this product and certified for the country of use.
  26. The safe operation of this equipment requires that the user heed and adhere to all installation and servicing instruction contained within the equipment's Setup Manuals.
  27. Warning: This product includes Ethernet Ports which allow this product to be connected to local area networks (LAN). Only connect to networks that remain inside the building. Do not connect to networks that go outside the building.
  28. The 8RU and 4RU frames are to be rack mounted only.
  29. CAUTION: These apparatus contain Lithium batteries, which if replaced incorrectly, or with an incorrect type, may cause an explosion. Replace only with the same type. Dispose of used batteries according to the manufacturer's instruction.
  30. Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
  31. For applicable Touchscreen Panel power supplies, see user instructions contained within the product's Setup manual.
  32. CAUTION: The Aux Power connectors PS1 and PS2 on the back of the Acuity™ control panels are for use with the following Acuity™ approved accessories: Touchscreen Display MN:AP-TOUCHSCREEN-A (PN:4820AR-243-01) and Auxiliary Control Panels MN:AP-AUX2RU40 (PN:4820AR-283-01), MN:AP-AUX2RU32 (PN:4820AR-282-01), and MN:AP-AUX2RU24 (PN:4820AR-281-01).
    ATTENTION : Les connecteurs d'alimentation auxiliaire PS1 et PS2 sur le dos des panneaux de contrôle d' Acuity™ sont pour une utilisation avec les éléments suivants Acuity™ accessoires approuvés: Écran tactile MN:AP-TOUCHSCREEN-A (PN:4820AR-243-01 ) et de Contrôle Auxiliaire Panneaux MN-AUX2RU40 (PN:4820AR-283-01 ), MN:AP-AUX2RU32 (PN:4820AR-282-01 ), et MN:AP-AUX2RU24 (PN:4820AR-281-01).
  33. Warning: This product when equipped with ACU4-EXEIP-IN/ACU8-EXEIP-IN (Evertz® IPG-IPBLADE-IP-10GE) or ACU4-EXEIP-OUT/ACU8-EXEIP-OUT (Evertz® IPG-IPBLADE-OP-10GE) ethernet gateway options, will have fiber optic outputs. Never look directly into an optical fiber. Irreversible eye damage can occur in a matter of milliseconds.
  34. CAUTION: The ACU4-EXEIP-IN/ACU8-EXEIP-IN (Evertz® IPG-IPBLADE-IP-10GE) or ACU4-EXEIP-OUT/ACU8-EXEIP-OUT (Evertz® IPG-IPBLADE-OP-10GE) ethernet gateway option(s) for this product have 12 SFP ports available. The Acuity™ system is designed to make use of only 8; 7 Dual LC Fiber and a single 1000BASE‑T copper modules. The four additional ports are not indented for use with the Acuity™ product.
  35. CAUTION: RISK OF ABNORMAL SUPPLY LOADING: USB connected accessory loading not to exceed 5 USB unit loads. Each USB unit Load on Rear panel is limited to 250mA max.
  36. CAUTION: The pressure in the panel struts diminishes over time. Check the panel strut locking mechanism before servicing. Stop maintenance work and contact the manufacturer if there is a failure of the panel strut locking mechanism.
  37. For use at altitude 2000m or lower.
  38. For use in non-tropical locations.
  39. CAUTION: Do not make mechanical or electrical modifications to the equipment or add metallic items, such as metallic foil labels, to the printed circuit boards. Modifications can impair regulatory compliance, or performance and may void your warranty.