To Set an IP Address Using DHCP

Due to the nature of DHCP, your switcher may get a different IP address each time it is powered on or re-connected to a network. You must have the switcher connected to a network to be able to obtain an IP address using DHCP.

Note: Ensure that DIP switch 3 on the frame is set in the up position. If this DIP switch is set in the down position, the IP address is fixed at 192.168.1.1 192.168.0.123 . Ensure that DIP switch 3 on the frame is set in the up position. If this DIP switch is set in the down position, the IP address is fixed at 192.168.1.1 192.168.0.123 .
  1. Press MENU > SYSTEM > NEXT > NEXT > FrmIP Addr.
  2. Use the left knob to select Mode.
  3. Press the Edit knob.
  4. Use the Value knob to select DHCP.
  5. Press the Value knob.
  6. Press the Reboot knob to restart the switcher in DHCP mode.
    The switcher will request an IP address when it restarts.