To Set Up a WhiteFlash

A WhiteFlash transition is performed just like a normal dissolve except that you must set the color for the flash and the rates for the onset, hold, and fade. transition is performed just like a normal dissolve except that you must set the color for the flash and the rates for the onset, hold, and fade.

  1. Click Navigation Menu > Live Assist > ME > Trans > Dissolve.
    Tip: You can use the same procedure for a MiniME™ or MultiScreen.
  2. Click Trans Rate and enter the length of the background transition in the ME Rate field, or the length of a key transition in the Key X Rate field.
  3. Click Flash.
  4. Use the Onset % and Offset % sliders to select the percentage of the transition that each phase of the WhiteFlash takes.
    • Onset — duration of the dissolve to the WhiteFlash color.
    • Offset — duration of the dissolve to the preset video source.
    • Hold — duration of the dissolve that the WhiteFlash color is held. This value is the residual of entire duration minus the onset and offset.
  5. Select a default or custom color for the WhiteFlash.
    • Default — click one of the preset matte colors.
    • Custom — click the arrow to the right of the Matte Color area and use the Hue, Saturation, and Lightness sliders to select your own color. Click OK to apply the color or Live to apply it in real-time.