Configuration icon.Burst feeds enable the ingestion of content uploaded to a Burst Bubble by reporters and fans. Follow the procedures in this section to create or edit a feed to ingest content from Burst Bubble.
Before creating a Burst feed, you must install and run the BurstOnTV service on your Inception Server and create a directory that is accessible to the BurstOnTV service and your Inception Server. Only one BurstOnTV service can access a Burst Bubble.
1.Log in to your Inception Server as an Inception administrator.
For information about Inception Server log in, refer to the procedure To access the Inception Server Configuration window.
2.On the main toolbar, click the Configuration icon.
3.On the Configuration window toolbar, click the 
Accounts and Feeds icon.
The Accounts and Feeds panel opens.
4.Click the Feeds tab.
The Feeds tab opens.
5.Click Add.
The Create New Feed settings open.
6.Use the Feed list to select Burst.
7.Click Next.
The Create Burst Feed settings opens.
8.In the Name box, enter a name for the Burst feed.
9.Select the Enabled check box to active the feed and make it available to all users.
10.In the Directory box, enter the path to the directory that contains the links to Burst content gathered by the BurstOnTV service.
11.In the Purge After box, enter the amount of time after which to delete old content from the feed.
The purge after time must be greater than or equal to 15 minutes and less than or equal to 60 days.
12.Use the list to the right of the Purge After box to select the time unit (Days, Hours, or Minutes) for the time entered in the Purge After box.
13.Click Next.
Inception adds the new Burst feed to the list of configured feeds. To view Burst content ingested by the feed, open the feed in the Burst Feed Viewer.
1.On the Configuration window toolbar, click the 
Accounts and Feeds icon.
The Accounts and Feeds panel opens.
2.Click the Feeds tab.
The Feeds tab opens showing the list of available feeds.
3.In the Configured Feeds list, select the Burst feed to edit.
4.Click Edit.
The Edit Burst Feed settings open.
5.Edit feed settings as required.
6.After completing the required feed setting edits, click Save.
For More Information on...
•how to disable feeds, refer to the section Enable or Disable a Feed
•how to delete feeds, refer to the section Delete a Feed