System icon.The following Inception features require the configuration of an e-mail server.
•Story creation via e-mail
•Story approval via e-mail
•System notifications sent to Inception administrators
To configure the e-mail server
1.On the Configuration window toolbar, click the System icon.
The System panel opens.
2.Click the Mail Server tab.
The Mail Server tab opens.
3.In the Incoming Mail Server section, use the Protocol list to select the e-mail handling protocol for the incoming e-mail server.
4.In the Host box, enter the host name of the incoming e-mail server.
5.In the Port box, enter the port number used for communicating with the incoming e-mail server.
6.Use the Encryption list to select the encryption method used by the incoming e-mail server.
7.In the Outgoing Mail Server section, enter the host name of the outgoing e-mail server in the Host box.
8.In the Port box, enter the port number used for communicating with the outgoing e-mail server.
9.Use the Encryption list to select the encryption protocol used by the outgoing e-mail server.
10.Select the Authenticate check box to enable authentication for the outgoing e-mail server.
Clear this check box to not use authentication for outgoing e-mail.