To Set Up an Input FSFC (UHDTV1 Only)

Set up the FSFC that has been assigned to the input. The conversion that is available depends on the format the switcher is operating in and the input that is being converted.

Note: You must assign an FSFC to the input before you can set it up.
  1. Click Navigation Menu > Configuration > Inputs > External.
  2. Click the Configure button for the input you want to set up the FSFC for.


  3. Click a Scaler button to select the type of format conversion you want to apply to the input.
    • 12G-SDI — no conversion is applied to the input (single-link 12Gb/s UHD-​2SI).
    • Q2SI(input 3 and 8 only) — the input is converted from quad-link 3Gb/s UHD-​2SI.
    • QSD(input 3 and 8 only) — the input is converted from quad-link 3Gb/s UHD-​QSD.
    • 1080p — the input is converted from 1080p.
    • 1080i — the input is converted from 1080i.
    • 720p — the input is converted from 720p.
  4. Click Frame Sync to apply a frame synchroniser to the input.
    Note: If a frame delay has been applied to the selected input, the frame sync functionality is disabled.