To Set Up the MultiViewer for ViewControl

Note: The switcher must be operating in a 1080i or 720p video format for ViewControl to operate.
  1. Press MENU > SYSTEM > MultiView.
  2. Use the Layout knob to select one of the ViewControl layouts.
    • VCtrlT — (ViewControl Top) places the boxes at the top of the screen.
    • VCtrlB — (ViewControl Bottom) places the boxes at the top of the screen.
    Tip: If you want to create a custom ViewControl layout, you can use one of the other MultiViewer layouts to create the look you want, and use PanelBuilder in DashBoard to assign functionality to the layout. Sources can be hidden from a layout by assigning black to the box. For more information on PanelBuilder, refer to the DashBoard documentation.
  3. Click the Overlay button and select the overlay input from DashBoard. This is keyed over the MultiViewer layout.
  4. Use the Clip slider to adjust the clipping of the overlay source.
  5. Press NEXT > NEXT > NEXT.
  6. Use the Box knob to select box one for the MultiViewer you are using for ViewControl.
    For example, if you are assigning MultiViewer one (1) to ViewControl, select MV1:1.
  7. Use the In/Out knob to select PV.
  8. Use the Box knob to select box two.
  9. Use the In/Out knob to select PGM.
  10. Assign additional sources to the remaining MultiViewer boxes. These are the sources that will be available in ViewControl.