Frame DIP Switches
There are a number of DIP switches inside the frame that are used to diagnose the operation of the switcher.
| DIP | Description |
|---|---|
| 1 | This DIP switch forces a RAM test every time the switcher is powered on. It is in the up (off) position by default. |
| 2 | This DIP switch is unused and should be left in the default up (off) position. |
| 3 | This DIP switch is used to set the IP address of ethernet port 1 on the frame to the default value (192.168.0.123) and ethernet port 2 to DHCP. It must be in the up (off) position to set another IP address for the frame. |
| 4 | This DIP switch prevents software upgrades. It must be in the up (off) position to upgrade the switcher. |
| 5 | This DIP switch is unused and should be left in the default up (off) position. |
| 6 | This DIP switch is unused and should be left in the default up (off) position. |
| 7 | This DIP switch is unused and should be left in the default up (off) position. |
| 8 | This DIP switch is unused and should be left in the default up (off) position. |