To Set Up Input FSFC

Turn on an FSFC for each input that needs to be converted.

Refer to Supported FSFC Input Mode Video Formats for a list of compatible video format conversions.

  1. Click Navigation Menu > Configuration > Inputs > Physical.
  2. Click the Configure button for the input you want to assign an FSFC to.
  3. Click the Type button for the type of frame sync you want to apply.
    • SDI — no FSFC is applied to the input.
    • SDI-FS — an FSFC is applied to the input.
    • QuadFS — a timed FSFC is applied to the input. Each QuadFS is timed to the first SDI-FS in the group of four (1-4, 5-8, 9-12, etc.). The SDI-FS must be applied to the first input and QuadFS to the rest of the inputs in the group.
      Tip: Use this if you are taking the quad-split output from an untimed UHDTV1 camera that you need to frame-sync. The frame syncs applied to each input are locked together for timing so that all four inputs are in sync.
  4. Click the Framing button for the aspect ratio conversion mode you want to use.
    The options that are available depend on the video format that the switcher is converting from and to.
    • FullThe video signal is scaled disproportionately to fill the display of the new aspect ratio. Aspect distortion occurs as the image is stretched/compressed to fit in the new aspect ratio.
    • ZoomThe central portion of the video signal is zoomed to fill the display of the new video format. No aspect distortion is introduced but the edges of the video signal may be cropped.
    • Letter BoxBlack bars are added to the top and bottom of a 16:9 image to display correctly in a 4:3 video format.
    • Pillar BoxBlack bars are added to the right and left of a 4:3 image to display correctly in a 16:9 video format.