To Set Up a Pattern

When a pattern generator is assigned to a wipe, mask, or wash, the pattern setting are displayed. Selecting the WIPE button, KEY SEL button, or the matte generator (BG) returns to this menu. When a pattern generator is assigned the pattern settings are part of the setup menu.

  1. Use the Pattrn knob to select the wipe pattern you want to use. You can also select the pattern by pressing the pattern button directly.
  2. Use the X Pos knob to position the wipe pattern horizontally. You can also use the positioner.
  3. Use the Y Pos knob to position the wipe pattern vertically. You can also use the positioner.
  4. Press NEXT.
  5. Use the Aspect knob to adjust the aspect ratio of the patten. Not all patterns can be adjusted.
  6. Use the Border knob to apply a border to the wipe.
  7. Press NEXT. If a border is applied to the wipe or mask, you must press NEXT multiple times to get to the next step.
  8. Use the Rot knob to adjust the aspect ratio of the patten. Not all patterns can be rotated.
  9. Use the HMult knob to multiply the pattern horizontally.
  10. Use the VMult knob to multiply the pattern vertically.