Frame Network Setup

If you are connecting to the frame over ethernet you must use DashBoard to set the IP address of the frame. The frame comes from the factory set with a static IP address (192.168.0.123) but can be set to use DHCP to automatically obtain an IP address.

Note: If you use a DHCP server, it must be set to always give the frame the same IP address. DashBoard, the Carbonite Black control panel, and CarboNET need a fixed IP address to connect to.

Tip: If you do not know the IP address of the frame, you can set DIP switch 3 on the frame to lock the IP address to 192.168.0.123. The frame must be re-started for the new IP address to be applied.