To Set Up a Pattern

  1. Select the pattern you want to use.
  2. Press X/Y Size and use the X, Y, and Size knobs, or positioner, to move and change the size of the pattern.
    • X — move the pattern from side to side
    • Y — move the pattern up and down
    • Size — change the size of the pattern
  3. Press Size/Soft Border and use the Border, Softness, and Size knobs to apply a border to the pattern.
    • Border — adjust the size of the border on the pattern (0 turns the border off)
    • Softness — adjust the softness of the border or edge of the pattern. If there is no border applied, the softness is applied to the edges if the pattern.
    • Size — change the size of the pattern
  4. Press Aspect to toggle it to On and use the Aspect knob to adjust the aspect ratio of the wipe pattern or preset pattern.
  5. Press Rotation and press Rotation to toggle it to On. Not all patterns can be rotated.
    • Continuous Rotation — press to apply a continuous rotation to the pattern. Use the Speed knob to select the rate at which the pattern continuously rotates. Selecting a positive value rotates the pattern clockwise, and selecting a negative value rotates the pattern counter-clockwise.
    • Transition Rotation — press to apply a rotation that is tied to the speed of the transition. Use the Rotation knob to select the amount of rotations of the pattern that occurs during a transition. Selecting a positive value rotates the pattern clockwise, and selecting a negative value rotates the pattern counter-clockwise.
    • User-Controlled Rotation — press to rotate the pattern. Use the Degrees knob to adjust the rotation of the pattern.
  6. Press UP ONE.
  7. Press H-Mult and V-Mult to multiply the pattern horizontally ad vertically. Press the button repeatedly to apply up to 5 times multiplication in either direction.
  8. If you are using a matrix pattern, press Pattern Options > Matrix Tile Size and select the tile shape you want to use (Square, Tall, or Wide), and use the Size knob to select the size of the tiles.
    • Square — press to use a square tile for the matrix.
    • Tall — press to use a tall tile for the matrix.
    • Wide — press to use a wide tile for the matrix.
    • Size — select the number of tiles that are used in the matrix. The available selections depends on the shape of the tile selected.
  9. Press UP ONE.
  10. Press Wipe Modulation and press Modulation to toggle it to On.
    • Vertical Params — press and then use the Amplitude, Wavelength, and Rate knobs to adjust the appearance of the waves moving vertically.
      • Amplitude — adjust the height of ripples.
      • Wavelength — adjust the width of the of ripples used, or the number of the ripples.
      • Rate — adjust the speed that the ripples move along the vertical sides of the pattern (Animation must be On). A positive value moves the ripples right to left and a negative values move the ripples left to right. A value of 0 causes the ripples not to move.
    • Horizontal Params — press and then use the Amplitude, Wavelength, and Rate knobs to adjust the appearance of the waves moving horizontal.
      • Amplitude — adjust the height of ripples.
      • Wavelength — adjust the width of the of ripples used, or the number of the ripples.
      • Rate — adjust the speed that the ripples move along the horizontal sides of the pattern (Animation must be On). A positive value moves the ripples top to bottom and a negative values move the ripples bottom to top. A value of 0 causes the ripples not to move.