To Set General Memory Attributes

  1. Press HOME > Attributes > ME Attributes.
    Tip: You can also press ATTRIB on the Effects Memory module.
  2. Press General.
  3. Use the ME knob to select the ME that you want to set up the ME attributes for.
    Tip: The memory that you are currently setting the attributes for is listed near the top left of the menu.
  4. Select the video sources and key status that you want to be recalled with the memory.
    • BKGD/PGM — source selected on the Background/Program bus is recalled with the memory.
    • PST — source selected on the Preset bus is recalled with the memory.
    • UX — source selected on Utility bus X is recalled with the memory.
    • Key X Xpt — sources selected on the Keyer buses are recalled with the memory. Keyer parameters such as key type, clip, and gain settings are always recalled with a memory.
    • Key X State — the on-air status of the keyers are recalled with the memory.
    • Key X Type — the key types selected for the keyers are recalled with the memory.
    • Key SEL — the selected key (SEL button) on the Keyer module is recalled with the memory.
    • Chroma Key — the chroma key settings are recalled with the memory. This is useful for virtual set environments where you want to recall different shots but not change the chroma key settings with the memory recall.
  5. Select the Global-Store and ME-Store channels (Channel X) that you want recalled with the memory.
    Note: The Recall Global-Store and Recall ME-Store personality options must be set to Attributes to be able to not recall them with the memory.
  6. Select how the Transition module is recalled with the memory.
    • Run Auto Trans — an auto transition performed after a memory is recalled. Remember to set up the transition in the Transition module when you store the memory so that the desired transition is performed after the memory is recalled.
    • Next Trans Buttons — the selection of the Next Transition Select buttons is recalled with the memory.
    • Transition Area — the Transition Parameter and Transition Type buttons, but are recalled with the memory. The Fader, Transition, or Next Transition Select buttons are not recalled.